Performance upgrade by ECU re-programming (engine control unit re-map)
Stage 1 consists of optimisation of engine management software. This is done using the latest technology in order to achieve the best possible results and most efficient power and torque gains. Before each re-map is performed, various mechanical checks are carried out. Expected gains are approximately +1-15bhp and +15-18lbs.ft of torque including removal of the speed limiter.
Stage 2
Engine Base 4.2 V8 N/A ~414bhp
Performance upgrade by ECU re-programming (engine control unit re-map)
Sports air filter
Exhaust system with sports catalytic converter
Stage 2 consists of APS ECU re-map, sports air filter and Milltek Sport exhaust system. The Milltek exhaust is available in two options - resonated and non-resonated. The sound with this exhaust fitted is simply wonderful and with the added benefit of being lifetime warranted, it further adds to enhance the ownership of the R8. For pictures or sound files please email us or browse the Milltek Sport website at www.millteksport.com
Audi R8 Exhaust Conversions
Sport Exhaust ~Audi R8
Cat Back Resonated
Removes secondary catalytic converters, quieter system which is still road legal. Uses original tips. Kit includes:
LH resonated connecting pipe
RH resonated connecting pipe
Silencer assembly - excluding trims
Cat Back Non-resonated
Removes secondary catalytic converters, non-resonated louder system which is still road legal. Uses original tips. Kit includes:
LH non-resonated connecting pipe
RH non-resonated connecting pipe
Silencer assembly - excluding trims
Cat Back Resonated including secondary catalysts
Including secondary catalytic converters, quieter system which is stll road legal. Uses original tips. Kit includes:
LH Hi-flow Sports Catalyst Section
RH Hi-flow Sports Catalyst Section
Silencer assembly - excluding trims
Audi R8 Transmission Conversion
Sachs clutch kit
Sachs reinforced pressure plate and driving disk suitable for road and track use. Allows for greater engine output and harder driving style. Keeps original flywheel. Workshop time 2 days.
Audi R8 Suspension Conversions
Stage 1
Sport spring kit working with standard damping. Reducing ride height by approximately 15mm on the front and 30mm on the rear. Fitting includes four wheel laser alignment using our VAG main dealer spec system.
Stage 2
Sport damper and spring kit allowing height adjustment of the front and rear beyond Stage 1. Suitable for road and track use. Fitting includes four wheel laser alignment using our VAG main dealer spec system.
Four wheel alignment option to Re-adjustment the suspension geometry for track day use only.
Stage 3
Coilover suspension kit replacing standard springs and dampers. Allowing damping and rebound adjustment. Also allowing height adjustment .
Fitting includes four wheel laser alignment using our VAG main dealer spec system.
Not available if vehicle has magnetic ride.
Audi R8 Brake Conversions
Stage 1
Stage 1 brake upgrade consists of Pagid RS4-2 Blue pad. Ideal for fast road use. Including front and rear replacement.
Specific pad details:
Friction Level Cold: 0.40
At 100 degrees centigrade: 0.42
At 300 degrees centigrade: 0.43
Max at: 0.46 @550 degrees centigrade
Constant working temperature: 350-600degrees centigrade
Max temperature for short period only: 650 degrees centigrade
Stage 2
Stage 2 brake upgrade consists of ceramic based Pagid RS-29 track pad. Suitable only for track use. Including front and rear replacement:
Specific pad details:-
Friction Level Cold: 0.40
At 100 degrees centigrade: 0.43
At 300 degrees centigrade: 0.47
Max at: 0.49 @550 degrees centigrade
Constant working temperature: 400-700degrees centigrade
Max temperature for short period only: 750 degrees centigrade
Stage 3
Replaces standard front disc with 34mmx380mm dia. two piece disc. Uses standard calliper and revised brackets. Front only. Also available with slotted disc. Includes brake fluid upgrade.
Brake fluid upgrade
Brake fluid upgrade using Motul RBF600 fluid. A real must for serious drivers.
Specific fluid details:
Dry boiling point of 312 degrees centigrade
Wet boiling point of 316 degrees centigrade
Audi R8 Retro-Fit Conversions
Cruise Control
Original Audi parts used to fit cruise control as if from factory
Audi R8 Servicing
Manufacturer specification servicing available for the Audi R8 from APS. Regular maintenance of your R8 is important, particularly if you participate in track use or racing. Services available include:-
Pre track day inspection and checks
Additional post track day inspection and after service
Servicing according to manufacturer schedule
Brake fluid change or upgrade
Gearbox testing and servicing
Technical fault finding
Electrical fault finding
All service work undertaken is done so using only Volkswagen Audi Group original parts.
